More Covering and the Kelch Stearman Flies

Many of you that follow this blog also know of my involvement with the Kelch Aviation Museum in Brodhead, WI.  The 1928 Stearman C3B shown above was restored in 1997 by Kent McMakin for Al Kelch.  Tom Hegy flew it for about 1/2 hour, then Al decided it was too valuable to fly, so it was parked - for the next 19 years!  Those years took a toll on it, and I spent about a month getting it annualed and airworthy.  This past Monday, I got the privilege of flying it once again!  How does it fly??  Like a truck!  Very heavy on the controls and not pleasant by todays standards, but it is so cool!  The Wright J5 is the best part and deserves no other engine powering it.  I'll be flying it around at the MAAC fly-in at Brodhead in September.  

Here's a link to a video:

https://vimeo.com/179248455

Besides all that fun, I got some more covering done on the LP.  

Practicing the modified seine knot

Runner along reinforcing tape

 It had been too humid to spray any dope, so I finished all the tail surfaces.  I don't know about you, but I always have to practice tying the modified seine knot as it is usually several years between that stage on projects.  I prefer to tie it with the runner on the outside, with round lacing cord.  If you carefully position the runner along the reinforcing tape, it is practically invisible.  Many people look at my covering jobs and don't even notice it.

Lacing on horizontal stabilizer

Horizontal stabilizer

Elevator

Once laced, all the surface tapes need to be applied.  Here they all are with the brushed coats and spray coats of nitrate dope applied.

Vertical fin

Rudder

Finally, we got a nice break in the weather this weekend and I was able to start spraying silver on the fuselage.

Here are the first 2 cross-coats applied.  The Ceconite process requires a minimum of 4 cross-coats, sanded after each 2 cross-coats.  I usually do 6 total, just to make sure the pinked edges are down nice and no other imperfections are showing.  Then 2 cross-coats of color, wet sanded with 1500 grit and one more cross-coat.  This results in a very nice finish that is not overly done.





So in the next couple of weeks will be more sanding, spraying, sanding, etc!  Hopefully the weather will continue to cooperate.  Check back soon!